This thread contains information for users that intend to install APPro54G Client firmware for RTL8186-based devices that are equipped with 2 MB Flash and 8 MB RAM memory.
This software requires purchasing a license. For 2/8 devices there's only a Client license available.
Software for 2/8 devices offers feature set identical to firmware present in APPro2401 outdoor.
Currently APPro54G Client 8 MB is available on following devices:
• Edimax 7206APG;
To purchase an APPro54G Client licence, you need to complete following steps:
1. Making an order and a payment, verification of access to the license generator.
2. Installing firmware in a device.
3. Generating license file and installing it in a device.
1. Making an order and a payment, verification of access to the license generator.
Payment for the licence should be made as indicated below. Data required to log on to the generator are send via e-mail to an address given in the order form. This e-mail is send only after payment transaction is completed.
After receiving e-mail, we recommend to log on to the generator system and verify whether the number of available licenses is consistent with placed order. In case of any discrepancies, they will be resolved via e-mail exchange.
2. Installing firmware in a device.
APPro54G Client installation file can be downloaded from location appropriate to your AP type (currently we support Edimax 7206APG, and compatible):
Software installation requires performing following steps:
• connect Ethernet port in your Windows or Linux PC directly to LAN1 port in your AP (in case of two-port devices) or LAN3 (for models with five LAN ports);
• configure computer's IP address to 192.168.1.10;
• press and hold AP's Reset button;
• with Reset button still pushed power on the AP;
• wait for about 2 seconds until red Status LED goes off – after that you can release Reset button;
• using TFTP client send firmware file in binary mode to 192.168.1.6 IP address:
tftp -m binary 192.168.1.6 -c put [file name] (on Linux)
or
tftp -i 192.168.1.6 put [file name] (for Windows);
• wait for few minutes while AP automatically installs new firmware and restarts itself.
NOTE: If above operation ends with errors, for example:
Kod:
tftp -m binary 192.168.1.6 -c put appro54G-client-ovislink5460.bin
Transfer timed out.
verify whether you configured correct IP address and there's direct Ethernet connection between computer's and device's LAN ports, and check if you peformed correct Reset button/power on sequence.
After successful APPro54G Client installation the device is available with default configuration:
• IP Address: 192.168.100.252
• login: admin
• password: admin
Further updates of APPro54G Client 8 MB firmware should be made with appropriate page of Web interface and standard firmware files.
3. Generating license file and installing it in a device.
In a first step you need to find registration data of the device.
• configure your computer to IP address 192.168.100.10, and log on to the device using Web browser (type address http://192.168.100.252/);
• enter 'admin' as both username and password;
• locate strings of characters that begin with "Hardware ID" and "WLAN MAC".
Next, in a separate browser window, open a Web page with license generator.
• open new browser window and type address of the generator, as in an e-mail you received;
• you will be asked for username and password - enter login data from the e-mail;
• in the generator window select a license type you need, and type owner's data (company, name, address, e-mail);
• on device's Web page select characters shown after "Hardware ID:", then right-click that selection and select Copy from menu;
• on generator's Web pae right-click "Hardware ID:" field, and select Paste from menu; make sure that pasted data contains no spaces or other characters that aren't part of identifier string; example of correct identifier: "17-9b-[...]-0f-85"
• repeat two previous steps for "WLAN MAC" fields;
• click on Generate Licence button; your browser should download a license file; if download process did not start, (for example, browser has blocked this operation), you can download license file by clicking on a Download generated license: link;
• od device's Web page click on 'Choose File' button, and navigate to the file downloaded in previous step;
• Click 'Upload licence' button;
• if operation completes successfully, after restart APPro54G Client software will begin normal operation.
PRICING/AVAILABILITY
APProSoftware's products are available in following countries (for current prices please contact distributor):
Czech Republic and Slovakia:
Galance internet
Bohumil Boura
Fibichova 962
289 03 Městec Králové
Czech Republic
IČ: 62448064
DIČ: CZ7208030995
Nie możesz pisać nowych tematów Nie możesz odpowiadać w tematach Nie możesz zmieniać swoich postów Nie możesz usuwać swoich postów Nie możesz głosować w ankietach Nie możesz załączać plików na tym forum Możesz ściągać załączniki na tym forum
